K'MX 1032
The standout feature of this machine: productivity!
This machine is designed for machining complex workpieces up to Ø36mm (optional).
The 10 linear axes, 2 tool racks and its independent end-of-axis unit enable you to machine complex parts using four tools simultaneously, optimising cycle times. Its secondary spindle and dedicated 9-position carriage (X4) allow you to carry out complex operations during non-cutting time.
The Z1-axis travel allows parts 400 mm long to be produced in a single set-up. On this machine, the length of the part is essentially limited only by the length of the bar.
Latest-generation FANUC numerical control system.
Technical Data
| Technical specifications | K'MX 1032 | |
|---|---|---|
| Number of linear axes | 10 | |
| Main pin | BAR CAPACITY | Ø 32 mm (Ø 36 mm) |
| Spindle bore | Ø 37 mm | |
| Spindle power (100/60%) | 15/25 kW | |
| Spindle speeds | 8.000 rpm | |
| Spindle stroke | 410 mm | |
| Tool trolley | Number of trolleys | 2 |
| Number of posts | 2 x 5 | |
| Outdoor Tools Section | 16 x 16 mm | |
| Axial tool holder | Number of posts | 4 |
| Re-tacking pin | Spindle speeds | 10,000 rpm |
| Spindle power (100%/30 mins) | 3,7/5,5 kW | |
FANUC 31i numerical control system
Options: Rotating tools | Chip conveyor | C-axis on main spindle and secondary spindle | Long-part retrieval device | Oil mist extraction system | Fire suppression system | High-pressure coolant spray | Pneumatic nozzle | FANUC SLO chip breaker